Industries/Data Center NDT Inspection
NDT Inspection for Data Centers
Hyperscale, colocation, and AI data centers depend on reliable mechanical, cooling, and power infrastructure. Prime Inspections performs non-destructive testing on the welds, piping, and structural systems that protect uptime — from the chilled water loop to the backup generator fuel skid.
Our certified Level II and Level III technicians bring pipeline-grade radiography, phased array ultrasonics, and digital imaging to mission-critical construction — helping EPCs, GCs, and owners commission faster with documented, audit-ready inspection reports.
- 24/7 Response Nationwide
- Mission Critical
What we inspect
Certified Level II and Level III technicians, methods matched to the system and the governing code.
Chilled Water & Cooling Loops
RT, PAUT, and UT weld inspection on chilled water piping, condenser water loops, and the welded piping serving CRAC/CRAH units in hyperscale and colocation data centers.
Fire Suppression & Process Piping
Code-compliant NDT on pre-action, sprinkler, and clean-agent piping — MT, PT, and digital radiography to verify weld integrity before commissioning.
Generator Fuel & Backup Power Systems
Inspection of diesel fuel oil piping, day tanks, and UPS support structures with RT, PAUT, and conventional UT, documented for commissioning.
Structural & Pressure Vessel Inspection
Phased Array UT, TOFD, and MT on structural steel, skids, and ASME pressure vessels supporting power, cooling, and mechanical infrastructure.
Why Prime for data center construction
Commission faster
Digital radiography cuts inspection time per weld and eliminates 45+ minutes of film development — results your QA team can act on the same shift.
Audit-ready documentation
Every weld is reported against the governing code, with digital records EPCs, GCs, and owners can hand straight to commissioning agents.
Certified crews
Level II technicians certified to our written practice under ASNT SNT-TC-1A / ANSI/ASNT CP-189, with ASNT Level III oversight and AWS CWI support where the specification calls for it, with field experience on ASME B31 piping and structural steel.
Built for uptime schedules
24/7 emergency response from offices in Katy and Lubbock, Texas plus field locations nationwide — we mobilize on your schedule, not ours.
Related inspection services
Prime also covers these methods and industries.
Frequently asked questions
Which NDT methods apply to data center construction?
Radiographic testing (RT and digital DR), phased array ultrasonics (PAUT), conventional UT, magnetic particle (MT), and liquid penetrant (PT) — matched to the weld type: chilled water and condenser piping, fire suppression lines, fuel oil systems, and structural steel.
Do you work with EPCs and general contractors?
Yes. Prime integrates with EPC and GC quality programs as an extension of your team, delivering documented, code-compliant reports through commissioning.
What codes govern data center weld inspection?
Data center mechanical piping is normally examined to ASME B31.9 (building services piping), or ASME B31.1 where the scope is power piping, with sprinkler systems installed to NFPA 13; structural welds follow AWS D1.1. We inspect to the governing code named in your specification.
Capabilities & Technology
Put certified eyes on your welds
24/7 emergency response · Offices in Katy & Lubbock, TX + field locations nationwide · RT, DR, PAUT, AUT, TOFD, UT, MT, PT